Advertisement
T RO U B L E S H O OT I N G T I P S
Problem
Nothing happens when a setpoint occurs to turn the load
ON or OFF.
Solution
Review programmed setpoints making sure the day has
not been skipped.
Problem
You wish to clear the control's memory and start over.
Solution
Depress the reset switch to the right of the display.
Problem
Manual override does not work.
Solution
Check the load for proper wiring. remember, the contacts
on these units only switch what is applied to them. (Dry or
isolated contacts.)
Problem
Blank Display
Solution
Check the input power source, insure proper connection.
Problem
Control does not operate after programming.
Solution
If programming was not performed (changing clock time
or entering a setpoint) the control will not update itself.
Press the ENTER key and override the load until the next
scheduled setpoint.
Customer Service
800-951-5526
Technical Support
800-732-8400
ISO 9002 registered
Maple Chase Company
2820 Thatcher Road
Downers Grove, Illinois 60515
Made in Mexico
Paragon Electric Canada, Ltd.
5875 Kennedy Road
Mississauga, Ontario L4Z 2G3
From outside North America
630-719-5500
110-724B
Advertisement
