Install Lmu Controller Antenna - Safe Fleet LMU Controller Installation Manual

LMU Controller

Install LMU Controller Antenna

1. Identify a suitable location for the antenna on the inside of the windscreen.
The antenna must be installed on the inside of the front windshield out of the way of the driver's view.
The 10 foot antenna cables attach to the LMU Controller's GPS and Cellular antenna connectors.
IMPORTANT
• The antenna cable length is 10 feet long and cannot be extended. This may limit the location options for
the LMU Controller.
• Use only the supplied antenna. Antennas from other manufacturers will not work with the LMU Controller.
2. Using the supplied alcohol wipe pad, clean the window surface where the antenna will be installed.
3. Peel the protective cover from the foam backing on antenna.
4. Be careful not to touch or allow any foreign material to come in contact with the exposed adhesive.
5. Attach the antenna to the window.
• Do not attach within the wiper sweep area.
• Do not attach to windows that can open.
6. Run the cables to the intended LMU Controller location.
p. 6
© Safe Fleet | March 2019 | All rights reserved | Part #: 700-1132 R3
Installation
