Table of Contents
Advertisement
FIRST TIME USE
Timer function
The timer can be activated by pressing the corresponding sensors (+) and (-).
Values between 1 and 59 minutes are selectable but they can be modified at any
time. The seconds and minutes remaining until expiry are always displayed. To
cancel the timer operation, press the (+) and (-) keys at the same time.
Activation of the Timer
When off, it can be activated by pressing the corresponding sensors (+) and (-) at
the same time. A sound confirms power on and "0.00" appears on the display.
Timer operation with cooking zones
All the cooking zones can be controlled via the timer.
To operate the cooking zone with the timer, proceed as follows:
- activate the timer;
- select a cooking zone.
- within 10 seconds select the time to be programmed on the timer by pressing the - or
+ sensor keys. If this does not happen, the zone will switch off automatically.
Once the required time has elapsed, after 10 seconds the countdown for the selected
cooking zone starts. The display of the timer and of the cooking zone stop flashing.
Switching off the appliance
Shutdown occurs by acting on the on/off sensor. When the hob is switched off, a
sound is emitted and the symbol "H" appears on the power zones indicating either
the residual heat or a possible fault.
20
Advertisement
Table of Contents
