Kreepy krauly Super Sweepy User Manual page 15

Troubleshooting 5 of 5
• If debris is still lodged inside, you must remove the flapper. First lift up the lip of the foot pad and insert a flat-
headed screwdriver along side one of the two tabs found on either side of the baffle plate. (See Figure b)
Push the tab inward with the screwdriver until the baffle plate releases.Place a finger into the centre opening of
the baffle plate and pops out. Then pull the flapper out. Note: You should be able to do this without taking the
foot pad off.
• Once the debris is dislodged, insert the flapper back into the main body and snap the baffle plate back into
position. Be sure that it is securely in place. (See Figure d)
14