Changing The Addresses And Option Individually - Samsung AR07TSFABWKN Service Manual

4-3-5 Changing the addresses and option individually

When you want to change the value of a specific option, refer to the following table and follow the steps in
Common steps for setting the addresses and options on page 18.
SEG1
Function Page
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
Indication
and details
0
Example: Changing the Buzzer control (SEG17) option of the installation options to 1 disuse.
SEG1
Function Page
Indication 0
• If your indoor units support both cooling and heating, the mixed operation (two or more indoor units operate in
different modes simultaneously) is not available when the indoor units are connected to the same outdoor unit.
CAUTION
If you set an indoor unit as the master indoor unit by using the remote control, the outdoor unit automatically
operate in the current mode of the master indoor unit.
Samsung Electronics
SEG2 SEG3
Type of the option
Mode
to change
Option
D 0 to F
type
SEG2 SEG3
Type of the
Mode
option to change
D 2
SEG5
Tens position Units position
of the option of the option
number number
Tens Units
position 0 to 9 position
value value
SEG5
Tens position Units position
of the option of the option
number number
1
Troubleshooting
SEG6
New value
New
0 to 9 0 to F
value
SEG6
New value
7 1
4-17