Changing The Addresses And Option Individually - Samsung AR07CSDAFWKN Service Manual

4-3-5 Changing the addresses and option individually

When you want to change the value of a specific option, refer to the following table and follow the steps in
Common steps for setting the addresses and options on page 18.
Option SEG1
Function Page
Indication Details
Indication and
details
0
Example: Changing the Buzzer control (SEG17) option of the installation options to 1 disuse.
Option SEG1
Function Page
Indication 0
• If your indoor units support both cooling and heating, the mixed operation (two or more indoor units operate in
different modes simultaneously) is not available when the indoor units are connected to the same outdoor unit.
CAUTION
If you set an indoor unit as the master indoor unit by using the remote control, the outdoor unit automatically
operate in the current mode of the master indoor unit.
Samsung Electronics
SEG2 SEG3
Type of the option to
Mode
change
Indication Details Indication
D Option type
SEG2 SEG3
Type of the option to
Mode
change
D
SEG4
Tens position of the
option number
Details Indication Details
Tens
0 to F position 0 to 9
value
SEG4
Tens position of the
option number
2 1
Troubleshooting
SEG5 SEG6
Units position of the
New value
option number
Indication Details Indication
Units
position 0 to 9 New value
value
SEG5 SEG6
Units position of the
New value
option number
7
Details
0 to F
1
4-29