Advertisement
Available languages
Available languages
Part B – Buttons
B1: "ALARM SET" button
B2: "SNOOZE "button
B3: "TIME SET" button
Part C – Structure
C1: Hanging hole
C2: Stand
Getting started:
Open the battery compartment cover
Insert 3 x AA size batteries(not included) while observing correct polarity [" +" and " –" marks]
Replace the battery compartment cover
The unit can be placed onto any flat surface by stand; or wall mounted by the hanging hole at
the back of the unit.
Time and alarm setting
Radio-controlled time:
After batteries inserted, the clock automatically starts to scan the DCF time signal. Radio
Control Icon"
flashes,
Indicating now is receiving
DCF signal
The clock automatically receives the time signal at 2.00am & 3.00 a.m. every day to maintain
accurate timing. If reception stops if no signal was received successfully ("
disappear)
The clock can be set to scan the time signal manually by holding "
seconds. Each reception takes about 5 minutes.
Stop scanning by holding the "
"
" shown on the LCD if it is in Daylight Saving Time Mode
Manual time setting:
In time display, hold the "TIME SET" button for around 2 seconds to enter to clock/calendar
setting mode.
Press "▲" or "▼" button to adjust the setting and press "TIME SET" button to confirm each
setting. Keep the "▼"or "▲"button pressed to accelerate the setting process and reach the
desired value more quickly.
The setting sequence is: 12/24 hour time format -> time zone -> hour -> minute -> second
->year -> month -> date -> temperature unit -> weekday language
8 languages can be selected as weekday, they are: German, English, French, Spanish,
Italian, Dutch, Danish and Russian
B4: "▲/AL 1-2 ON/OFF" button
B5: "RESET" button
B6: "▼/AL 3-4 ON/OFF/
C3: Battery compartment cover
" flashes on the LCD.
Indicating signal received
successfully
" button (B6) for 3 seconds.
turns on,
EN2
"button
disappear,
Indicating signal reception
failed
" button (B6) for 3
" on LCD
Advertisement
