Dismantling & Disposal - Kemper KHS CoolFlow Operating Instructions Manual

4.7
Special functions & language
Network settings
Set language
5
Dismantling & disposal
Dismantling
Preconditions:
• The system is disconnected from the power supply.
• The lines are shut off.
1. Remove the PVC cover.
2. Remove the plug.
3. Disconnect the pipes.
4. Remove the shut-off devices.
5. Remove the legs.
Storage
Store the cold water chiller as follows:
•
Packed
•
In a dry and dust-free place
•
Not outdoors
•
Protected from heat and cold
•
For storage over 3 months: Check the condition of the com-
ponents and packaging at regular intervals
1.
Disposal
Observe the local regulations on waste
disposal and waste recycling.
The product must not be disposed of with
normal household waste and must be dis-
posed of properly.
Old batteries must not be disposed of with
household waste. You are required by law to
bring batteries to a suitable collection point.
Waste brine must be disposed of properly in
accordance with the legal regulations.
© www.kemper-olpe.de – 03.2020 / K410061000000-00-00 – 47 / 124
1.
2.
EN
2.