Advertisement
browser:
ж
http://x.x.x.x:31228
ж
Where x.x.x.x must be replaced by the local IP address of your PEAKnx touch
panel. This is displayed in the lower part of the YOUVI Dashboard App.
3.
From the menu on the left, select "Cameras".
4.
Add a new camera set using the „+" symbol and type in a suitable name.
5.
Click the "+"-Symbol next to "Select Camera Stream" to create a new camera stream.
6.
For the "Stream Name", enter an appropriate name of your preference.
7.
Under „Low Resolution Stream"-> „URL", enter the link of the camera stream from your
door station with a resolution of 320 x 240 pixels.
ж
This is composed of the IP address of the door station and the ending „/enu/
camera{resolution}.jpg", for example:
http://192.168.188.30/enu/camera320x240.jpg
8.
Change the „Stream Type" to „JPEG".
9.
Enter e.g. 500 ms for the refresh interval.
Set-up of a 2N door station with a PEAKnx touch panel
9
Advertisement
