Advertisement
Set-up of a 2N door station with a PEAKnx touch panel
22.
To operate the door station with the PEAKnx touch panels, it is necessary to increase
the microphone volume on the panel, depending on the VoIP software used.
Note:
If the microphone gain is too high, the transmission may be cut off and the sound quality
may deteriorate.
ж
To do this, right-click or long-press the loudspeaker icon in the taskbar and select
„Sounds".
ж
In the „Recording" tab, select the first microphone.
ж
In the following menu, you can set the microphone level in the „Levels" tab.
3. Setting up the YOUVI camera module (with Bria Solo Free)
To make use of the 2N door station's camera, it needs to be added and set up within YOUVI
Configuration.
1.
To add the camera module open YOUVI Dashboard on the panel and select Install
Camera Device. If you do not have a full license yet, you can purchase it in the PEAKnx
Shop.
2.
Switch to YOUVI Dashboard -> Camera Device OR open the configuration page on
your PC in your browser, making sure that the system running the browser is on the
same network as the PEAKnx touch panel. To do this, enter the following URL in your
8
Advertisement
