Advertisement
Set-up of a 2N door station with a PEAKnx touch panel
10.
Follow the same procedure for the „High Resolution Stream" used for full screen dis-
play, except that you now change the resolution to 1280 x 960 pixels.
Note:
Keep in mind that high frame rates (short refresh intervals) and resolutions put additio-
nal strain on your network.
11.
Click "Save" to register the settings with your PEAKnx touch panel.
12.
Within the PEAKnx touch panel, switch back to YOUVI Visu
13.
In order to ensure that the visualization is automatically activated when the system is
rebooted, open the YOUVI Visu settings under Auto start and activate this feature.
14.
Now switch on the Edit Mode and switch to the Dashboard.
15.
Select the „Webcam" button to select a Camera created in YOUVI Configuration.
VoiP-Software Bria Solo Free
To use „Voice over IP" on the touch panel, you need a running instance of Bria Solo Free.
This VoiP software appears when a call from the door station is made and pops up, even
with the visualization running. So you can see the camera image and answer the call at the
same time.
Note:
This software can only be used on one device. If you want to connect several panels,
either the paid version or another software is required.
16.
On the panel, go to https://www.counterpath.com/plan-select-solo/.
17.
Tap on „Continue with Bria Solo"
18.
To use the software, you must first create an account.
19.
VoIP will then be set up. Select „Configure SIP Settings".
10
Advertisement
