Related Manuals for aspenhome L74-269963
Summary of Contents for aspenhome L74-269963
- Page 1 Distributed by Furniture Values International, LLC Executive leather Chair Legendary Aspen Value, Function and Design Page 1...
- Page 2 BEFORE USING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS. Save these instructions for future reference. FOR INDOOR USE ONLY IMPORTANT SAFEGUARDS NOTICE This article meets California Bureau of Home Furnishings flammability requirements – Technical Bulletin 117. Exercise care with this product near open flame or burning cigarettes.
- Page 3 Parts Identification F. Wooden base C. 5 Casters D. Pneumatic cylinder G. Seating Unit A. 4 Screws H. 2 Screws E. Seat Plate B. Allen wrench l. 2 Screws Page 3...
- Page 4 To Assemble 1.Insert the Pneumatic Cylinder (D) through the center hole on top of the Wooden base (F). 2.Attach the Seat Plate(E) to the Seating Unit (G) Using the 4 Screws(A). Do not tighten fully. Tight the arm use the 2 screw (H) on the bottom Side of the arm, and also use another 2 screw (I) On the top side of the arm.
- Page 5 To Adjust Height Adjustment: To raise the seat height, remove weight from the seat and pull up on the Height Adjustment Lever. To lower the seat height, while seated pull up slowly on the Height Adjustment Lever until the seat is at the desired height. LOCK/UNLOCK HEIGHT ADJUSTMENT TENSION ADJUSTMENT KNOB...
Need help?
Do you have a question about the L74-269963 and is the answer not in the manual?
Questions and answers