KitchenAid KNK1012 Owner's Manual page 5

USING THE STOVETOP PRECISION KETTLE
CHANGING THE FLOW CONTROL
TIP: Prior to first use, fill the Kettle with room temperature water and pour
at each flow control setting to become familiar with the different flow rates.
Your Kettle has three flow control
settings. Use the flow control lever
1
inside the Kettle to change the
settings.
NOTE: After heating water, be sure to empty the Kettle and allow it to cool completely
before changing the flow rate settings.
TIP: The flow control lever is meant to come out for cleaning. If you pull up too far
while changing the flow rate settings and the lever comes out, it can easily slide back
into place.
OPERATING THE STOVETOP PRECISION KETTLE
Remove lid from the Kettle and fill
1
with water.
NOTE: The Kettle should be at least half
full before operating. Do not fill the Kettle
past the "MAX" fill line.
Push the lever down for more
2
restricted flow; pull the lever up
for less restricted flow.
Replace the lid and place the Kettle
on your stovetop burner.
2
For best results, match the size of the
kettle base with the cooktop burner.
USING THE STOVETOP PRECISION KETTLE | 5