Replace Fans - Graco Reactor 2 E-30 Repair And Parts Manual

Repair

Replace Fans

Fans
Replace Replace Fans
Shutdown system to avoid electric shock. To avoid
burns, do not perform maintenance on the fan until
the system has reached ambient temperature.
Replace Replace Motor Replace Motor Fan Motor Fan Fan
1. Perform Shutdown, page
2. Open cabinet door and disconnect
fan cables from terminal blocks. See
Electrical Schematics, page
3. Remove four screws (21) from motor cover (11).
If necessary, fold frame (1) to remove motor
cover (10). See Repair Drive Housing, page
steps 1–10.
4. Cut tie wraps to remove cable.
5. Remove nuts (39), screws (22), washers (34)
and fan (32). Install new fan in reverse order.
Note
Ensure fan (32) blows onto motor.
Figure 8
62
46.
103.
55,
Replace Electrical Replace Replace Electrical Enclosure Electrical Enclosure Fan Enclosure
1. Perform Shutdown, page 46
2. Open electrical enclosure door (401). Loosen
four nuts (421) and remove fan (404).
3. Install new fan (404) in reverse order of
disassembly so that the fan blows out of the
electrical enclosure.
Figure 9
Fan Fan
333024S