Download Print this page

Bosch PS50 Operating/Safety Instructions Manual page 13

Bosch power tools cordless sander - oscillating sander user manual

Advertisement

Available languages

Available languages

BM 2609140575 07-08
CHARGING BATTERY PACK (BC430 30 MINUTE CHARGER)
Plug charger cord into your standard power
outlet, then insert battery pack into charger
(Fig. 3).
The charger's green indicator light will begin to
"BLINK". This indicates that the battery is
receiving a fast charge. Fast-charging will
automatically stop when the battery pack is
fully charged.
When the indicator light stops "BLINKING"
(and becomes a steady green light) fast
charging is complete.
The battery pack may be used even though
the light may still be blinking. The light may
require more time to stop blinking depending
on temperature. When you begin the
BATTERY
FIG. 3
RED LIGHT
GREEN LIGHT
7/8/08
3:54 PM
PACK
Page 13
charging process of the battery pack, a
steady red light could also mean the battery
pack is too hot or too cold.
The purpose of the green light is to indicate
that the battery pack is fast-charging. It does
not indicate the exact point of full charge.
The light will stop blinking in less time if the
battery pack was not completely discharged.
When charging several batteries in sequence,
the charge time may slightly increase.
When the battery pack is fully charged,
unplug the charger (unless you're charging
another battery pack) and slip the battery
pack back into the tool.
-13-
CHARGER

Advertisement

loading

This manual is also suitable for:

Ps50bnPs50bPs50-2cPs50-2blPs50-2abPs50-2a ... Show all