Advertisement
FEATURE OVERVIEW
Battery Charging Status Indicator Light
Solid = charging, off = fully charged
Blinking = battery fault (unplug and replug to reset)
Button Press
No flash = sleep mode or dead battery
Single flash = button press
Mark Spot
Save current location to the ProNav App. (Feature
coming soon with future firmware update)
Play/Pause
Pause and resume current mode. (Feature coming
soon with future firmware update)
GPS Anchor
Hold boat in its current location. When in anchor
mode, use PointJog to adjust anchor location.
Bluetooth
Connect remote to the ProNav Angler. Short press
wakes remote from sleep mode. Press and hold puts
remote into pairing mode.
Drive PointDrive™ and PointJog™
PointDrive can be used to change heading and
PointJog can be used to change anchor location by
simply pointing the remote in the direction you want
to go and pressing. Not active for manual controls.
Requires calibration.
Bluetooth Status Indicator Light
Blinking = pairing
Solid = connected
Manual Controls
Increase or decrease thrust or speed, turn
left or right, turn the prop on and off.
Rapid Speed
Rapid speed adjustment. Toggle between
current / maximum motor speed.
Compass Heading Lock
Lock current compass heading. Quickly
change heading using PointDrive or using
manual control left / right buttons.
GPS Vector Lock
Lock current course over ground. Adjust
course over ground using PointDrive or
using manual control left / right buttons.
Function
Multi-function key that allows combined
key presses for future expansion.
Cruise Control
Lock current speed.
(Feature coming soon with future firmware
update)
Advertisement
