Advertisement
FEATURES
Bluetooth:
Turns on and connects remote to the ProNav Angler.
How to Use
1.
Press and release to wake up remote / turn remote on
(startup mode).
2.
Press and hold
while in startup mode until the blue
indicator light turns solid, indicating remote is connected to
the ProNav Angler. (Reference Setup and Connection Guide for
initial setup)
Rapid Speed:
Toggles thrust between current setting and
maximum.
How to Use
1.
Function requires prop to be on.
2.
Press and release
to increase motor to maximum thrust.
3.
Press and release
again to quickly return back to prior
thrust setting.
Function:
Multi-function key allows combined key presses for
future expansion.
IMPORTANT: Use of Sonar Transducer Motor Attachments
autopilot in place due to the potential wrapping issues that may occur. If you plan to use an external transducer, it is recommended to use the ProNav
transducer cable saver to prevent damage of sonar transducer cable. This accessory is available at pronavmarine.com/transducer-cable-saver.
GPS Anchor:
GPS location. Motor will automatically adjust thrust and
direction to stay on desired spot.
How to Use
1.
Press and release
2.
Adjust location using PointJog.
3.
Use prop on / off to disengage mode.
Notes
•
For best results stop all forward momentum prior to
pressing button.
•
Left / right manual control can be used to unwrap wires
around shaft without disengaging anchor mode.
•
Reference knowledgebase articles on our website for more
information.
Feature Tip: Recommended Anchoring:
for a comparison of anchoring practices. In the event excessive cord
wrapping around motor shaft occurs (two or more wraps), use the left/
right manual controls or the foot pedal left/right controls to unwrap your
cord from around your motor shaft without losing your anchor point.
:
It is not recommended to use an external transducer cable on a trolling motor with any
Engages anchor mode to hold boat in current
to hold boat in current GPS location.
See images on next page
Advertisement
