Running The Initial Setup Of The Ciu 888; Logging On To The Ciu 888 And Changing The Initial Password - Honeywell CIU 888 Migration Manual

NOTE: In this release, only Internet Explorer 10 and 11, and Google Chrome (version
FIGURE 2-2
2 - 2
Commissioning of a Standalone System Setup
During commissioning of the CIU 888, the Entis Pro system

connected to the CIU 888 must be shut down.

2.2 Running the initial setup of the CIU 888

The first step in the procedure for the commissioning of a standalone
CIU 888 system setup is running the initial setup.

2.2.1 Logging on to the CIU 888 and changing the initial password

During the initial setup, a user has to log on to the CIU 888 and change
the initial password first.
Procedure:
1. On the PC/laptop connected to the CIU 888, launch a browser.
40 or later) are supported.
2. Enter the IP address of the CIU 888 in the address bar of the
browser. The IP address is: 192.168.1.1. Next, press the Enter key.
The Login window of the CIU 888 is displayed.
CIU 888: Login window
3. Enter the username and password to log in to the CIU 888. The
username is: ciuadmin. The initial password is CIU888@Enraf.
Next, click LOG IN.
After entering a valid username and password, the CIU 888 prompts
Ensite Pro to CIU 888 Migration Manual
CIU 888
Part No.: 4417593_Rev09