Huawei TP48200A-DT19C1 Installation Manual page 12

Hide thumbs Also See for TP48200A-DT19C1:
Table of Contents

Advertisement

TP48200A-DT19C1 & DT19C2 & HT19C1 & HT19C2
Installation Guide
If the power system is not powered on and does not supply power to any load for more than
two weeks, turn off all battery loops.
Basic Precautions
Before installing and maintaining the battery, note the following:
Short Circuit
Battery short circuit may cause human injuries. Although the voltage of ordinary batteries is
low, the instantaneous high current caused by the short circuit releases a great deal of energy.
There is danger of explosion if the battery is incorrectly replaced. Therefore, replace the
battery only with the same or equivalent type recommended by the manufacturer.
Keep away metal objects, which may cause battery short circuit, from batteries. If metal
objects must be used, first disconnect the batteries in use before performing any other
operations.
Hazardous Gas
Issue 03 (2014-02-23)
Do not wear metal articles such as wristwatch, hand chain, bracelet, and ring.
Use special insulated tools.
Take care to protect your eyes when operating the device.
Wear rubber gloves and a protective coat in case of electrolyte overflow.
When handling a storage battery, ensure that its electrodes are upward. Leaning or
reversing the storage battery is prohibited.
Do not wear metal articles such as wristwatch, hand chain, bracelet, and ring.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Safety
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tp48200a-dt19c2Tp48200a-ht19c1Tp48200a-ht19c2

Table of Contents