Huawei PDU8000 Series User Manual page 141

PDU8000 Modular Precision PDC V2.0
User Manual
Install and remove MCBs using the MCB extracting kit. Do not install or remove MCBs
barehanded.
Figure 8-13 Removing the MCB
Step 5 Remove the copper bars on both ends of the old MCB, and install the copper bars on a new
MCB.
Verify that the new MCB is switched to OFF before the installation.
Figure 8-14 Removing copper bars on both ends of an MCB
Step 6 Install the new MCB using the MCB extracting kit, and close the handles on both sides of the
hot-swap base.
Issue 03 (2018-01-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Maintenance Guide
132