AirLive WL-5460APv2 Faq

I have an ISP's wireless signal near my house, how could I connect

WL-5460APv2 to internet?

1. We recommend that please set WL-5460APv2 as WISP mode, and

configure the WAN setting.

In WISP mode, WL-5460APv2 provides five WAN access types to connect

to internet.

For example:



PPPo : ou have to input the user name and password to get internet

access from ISP.



P lient: he client will get



Static IP: ou have to

Please select a suitable WAN access type to establish internet

connection.

2. hen please connect WL-5460APv2 to ISP's wireless signal, and get

into the Status page of WL-5460APv2 to check whether WL-5460APv2

get public IP from ISP successfully.

P from ISP.

input the static IP address to connect internet.

Table of Contents

Need help?

Do you have a question about the WL-5460APv2 and is the answer not in the manual?

Page 1 I have an ISP’s wireless signal near my house, how could I connect WL-5460APv2 to internet? 1. We recommend that please set WL-5460APv2 as WISP mode, and configure the WAN setting. In WISP mode, WL-5460APv2 provides five WAN access types to connect to internet.
Page 2 WAN settings and security settings are correct. ou might need to contact with the ISP about the situation. If WL-5460APv2 get public IP successfully, please set your P ’s IP address as “Obtain an IP address Automatically” and set NS Server as “Obtain NS Server address Automatically”.