Sli Tm , 3-Way Sli Tm Tm; Installing Two Sli; Tm -Ready Graphics Cards - ASROCK X299 Taichi XE Manual

TM
2.9 SLI , 3-Way SLI
This motherboard supports NVIDIA
Link Interface) technology that allows you to install up to three identical PCI
Express x16 graphics cards. Currently, NVIDIA
supports Windows® 10 64-bit
*This feature is only supported with CPU with 44 lanes or 28 lanes.
Requirements
1. You should only use identical SLI
2. Make sure that your graphics card driver supports NVIDIA
the drivers from the NVIDIA
3. Make sure that your power supply unit (PSU) can provide at least the minimum power
your system requires. It is recommended to use a NVIDIA
the NVIDIA

2.9.1 Installing Two SLI

32
TM
and Quad SLI
® TM
SLI , 3-Way SLI
TM -ready graphics cards that are NVIDIA
®
website: www.nvidia.com
®
website for details.
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE3 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
If required, connect the auxiliary power
source to the PCI Express graphics cards.
TM
Operation Guide
TM
and Quad SLI
® TM TM
SLI and Quad SLI
® TM
SLI technology. Download
®
certified PSU. Please refer to
TM
(Scalable
technology
® certified.