Table of Contents
Advertisement
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)
SETUP AND MOVING
1.2 TRANSPORTING THE GAME
When transporting the game, such as in the back of a truck or with a hand truck, the
game's backbox must be secured to prevent damage to the side rails.
1. SECURE THE BACKBOX
1.
Ensure that the pinballs are re-
moved from the playfield, and se-
cure any free-moving mechanisms
that may get damaged in transport
3
2.
Remove the backbox securing
bolts
3.
Carefully lower the backbox onto
the side rails. Use a piece of card-
board or suitable padding between
the backbox and the game.
8.
Stand the game up on its back.
6
TOOLS REQUIRED
• STRAP (500LB OR GREATER)
• A HELPER
• HAND TRUCK
2
4.
Securely strap the back box to the
game
5.
The game may be transported with
the legs on. If the legs must be re-
moved, follow the remaining steps.
8
9
9.
Remove the front two legs.
KISS PREMIUM EDITION MANUAL #500-55H3-01
CAUTION
2. REMOVE THE LEGS AND
STAND UP
4
6.
7.
10. Secure all loose parts and trans-
NEVER TRANSPORT THE GAME IN A
MOVING VEHICLE WITH THE BACK-
BOX RAISED! TWO PEOPLE ARE RE-
QUIRED TO REMOVE THE LEGS!
Remove the legs, rear legs first. Use
a stool or a friend to support the
rear of the game.
Rest the rear of the game on the
ground.
port with a hand truck in the
upright position.
© 2015 KISS Catalog, Ltd.
Under License to Epic Rights.
6
Advertisement
Table of Contents
