Transporting The Game - Stern Pinball JAMES BOND 007 LE Service And Operation Manual

1.3 TRANSPORTING THE GAME

When transporting the game, such as in the back of a truck or with a hand truck, the
game's backbox must be secured to prevent damage to the side rails.
1. SECURE THE BACKBOX
1. Ensure that the pinballs are re-
moved from the playfield, and se-
cure any free-moving mechanisms
that may get damaged in transport
3
2. Remove the backbox securing
bolts
3. Carefully lower the backbox onto
the side rails. Use a piece of card-
board or suitable padding between
the backbox and the game.
8. Stand the game up on its back.
James Bond Indicia © 1962-2022 Danjaq LLC and Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved.
TOOLS REQUIRED
• STRAP (500LB OR GREATER)
• AN ASSISTANT
• HAND TRUCK
2
4. Securely strap the back box to the
game
5. The game may be transported with
the legs on. If the legs must be re-
moved, follow the remaining steps.
8
9
9. Remove the front two legs.
JAMES BOND 007 LE / PREMIUM MANUAL 500-55V2-01
CAUTION
2. REMOVE THE LEGS AND
STAND UP
4
6.
7.
10. Secure all loose parts and trans-
SETUP AND MOVING
NEVER TRANSPORT THE GAME
IN A MOVING VEHICLE WITH THE
BACKBOX RAISED! TWO PEOPLE
ARE REQUIRED TO REMOVE THE
LEGS!
Remove the legs, rear legs first. Use
a stool or a friend to support the
rear of the game.
Rest the rear of the game on the
ground.
port with a hand truck in the
upright position.
6
7