Table of Contents
Advertisement
13 HOT AIR DUCTING
The kitchen is equipped with a centrifugal fan suitable for
channeling the air to neighboring rooms. As standard, the
air comes out of the grill located on the front, on the left of
the fi re door.
By rotating the fan it is possible to exit with a 60mm diameter
air ducting pipe from the back of the stove. Follow the
instructions step by step to rotate the fan.
Unscrew the 4 screws and remove the fan maintenance grille
Unscrew the 2 screws and remove the left side.
Unscrew the 4 screws and remove the fan housing with its motor
Unscrew the 3 screws and turn the motor to position 1 or 2
Repeat the reverse operation.
1
Grid
maintenance
cooling fan
3
Ventilation
environment
environment
For ducting it is recommended not to exceed 6 meters of pipe and 3 90 ° bends, otherwise the hot air will lose eff ectiveness.
• Use 60 mm diameter pipes with smooth internal walls.
• If the pipes pass through cold walls, insulate the pipe with insulating material.
• In the outlet place a protective grid with large meshes with a minimum total net surface of 40cm 2.
• After 6 meters of pipe we can have a variable air fl ow.
CAUTION
Use heat-resistant pipes, maximum temperature 180 ° C. It is forbidden to use plastic pipes and derivatives..
28
side cover
Left
4
Ventilation
channeling
09/2020 - EN
2
Fan holder cover
Air + engine
5
1- Room ventilation position
2- Ducting ventilation position
1
2
1 2
1
Advertisement
Table of Contents
