Page 1
WASHING MACHINE DYSM 7122D3 PROGRAMME SELECTOR Use this control to select the desired wash programme. Turn the selector (it can be turned in both directions) so that the programme is opposite the reference indicator (p). The temperature selected will depend on the programme.
Page 2
Programme table mod. DYSM 7122D3 washing powder option keys max. load aprox. temp. spin max. time setting speed load programme programme for min. ºC rpm/min Fast coloureds with prewash display 90º 1200 • • • • • • • •...
Page 3
PREPARING THE WASH CYCLE 1.- Once the washing is loaded, ensure that the drum doors are properly closed.. 2.- Add detergent and additives, not exceeding the maximum level indicator. detergent for pre-wash I • detergent for wash programme II • fabric conditioner •...
Page 4
Press and hold the button for 5 seconds until the display will show the settings for the programme selected. At this stage it is possible to start the programme previously selected by pressing the “START/PAUSE” button or to cancel the process by setting the selector to the OFF position and then selecting another programme.