Starting The Engine - Coleman Powersports JL50QT-14 Owner's Manual

OPERATING THE SCOOTER
STARTING ENGINE
To start the engine
1. Place the ignition key to the "ON"
(1) position. (Fig 10)
2.. Set the ON/OFF switch (2) located on
the handlebars to the on
( Fig. 11)
3. Pull in the left brake handle lever (3)
(Fig 12)
4. Depress the ingnition start button (4)
until engine starts. (Fig 11)
Note: Do not operate starter more than 5
seconds at a time. Allow starter to rest 3
seconds before attempting to start again.
WARNING
!
Starting or running the scooter in
an enclosed area such as a garage
or shed where there is no ventila-
tion is hazardous
Inhaling exhaust fumes from the
scooter can cause severe injury or
death
Never start or run the scooter in an
inclosed environment where there
is no ventilation. Always start and
run outdoors.
position
11
1
Fig 10
2
Fig 11
3
4
Fig 12