Samson 4708-45 Mounting And Operating Instructions page 6

Safety instructions and measures
Î Observe the requirements for personal protective equipment specified in the valve docu-
mentation.
Î Check with the plant operator for details on further protective equipment.
Revisions and other modifications
Revisions, conversions or other modifications of the product are not authorized by SAMSON.
They are performed at the user's own risk and may lead to safety hazards, for example. Fur-
thermore, the product may no longer meet the requirements for its intended use.
Warning against residual hazards
To avoid personal injury or property damage, plant operators and operating personnel must
prevent hazards that could be caused in the pneumatic instrumentation by the signal pressure
or by moving parts by taking appropriate precautions. They must observe all hazard state-
ments, warning and caution notes in these mounting and operating instructions, especially
for installation, start-up and service work.
Responsibilities of the operator
The operator is responsible for proper operation and compliance with the safety regulations.
Operators are obliged to provide these mounting and operating instructions to the operating
personnel and to instruct them in proper operation. Furthermore, the operator must ensure
that operating personnel or third parties are not exposed to any danger.
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the specified hazard statements, warning and caution notes. Furthermore, the operat-
ing personnel must be familiar with the applicable health, safety and accident prevention
regulations and comply with them.
Referenced standards and regulations
Devices with a CE marking fulfill the requirements of the Directives 2011/65/EU (RoHS) and
2015/863/EU. The declaration of conformity is included at the end of these instructions.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− The mounting and operating instructions of the components on which the supply pressure
regulator is mounted (valve, actuator, positioner etc.).
6 EB 8546-1 EN