Table of Contents
Advertisement
UPMAX® Upmixing
LFE Channel Controls
The LFE Channel controls are used to tune the crossover frequencies, gain, and signal routing of the low frequency
effects audio.
LFE Crossover
The LFE Crossover control (8-3B) defines the crossover frequency at which to extract the low frequency signal
routed to the LFE Channel and is typically set between 60 and 100Hz. It works in combination with the LFE
Routing and LFE Gain controls to create the LFE Channel.
Figure 8-2 – UPMAX preset and format controls
Chapter 8 | 46
Advertisement
Table of Contents
