Chapter 5 | 18
I/O, Clocking, and Reference
Click the Save button (5-3D) to save the configuration or the Cancel button (5-2E) if you need to start over
without saving your configuration.
Figure 5-3: Creating an input group.
Routing Audio to the Program Input
After saving the input group, it is necessary to first set the priority of the input source by dragging the input audio
lines (5-4A) and then clicking when the desired priority level (5-4B) is highlighted. The LA-5300 will look for
audio first on inputs connected to Priority 1. If no signal is present, it will look to subsequent priorities in order.
Figure 5-4: Routing input audio and setting the priority.