Chapter 4 | 11
Remote User Interface
Additional information about installed options, clock sync, network status and IP address, power supply status,
software and FPGA versions, and unit uptime are displayed to the right of the screen (4-1F).
Figure 4-1 – Home screen when not logged in
Logging In
Making modifications to the LA-5300's configuration, signal routing, or transcoding parameters via the remote
user interface requires logging into the unit. At this time, only one level of access with is supported.
Enter the default password (1234) in the password field (4-1G) and click on the Log in button (4-1H). The
password can be changed on the System page.
To remotely power down the unit, click on the Shutdown Unit button (4-1I).