ACCESSORIES WIRING DIAGRAMS
NOTICE: The cut out speed & hard start settings are factory preset. Changing
those settings may cause early motor failure.
Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
62
HIGH VOLTAGE!
DISCONNECT ALL POWER BEFORE SERVICING OR INSTALLING THIS
UNIT. MULTIPLE POWER SOURCES MAY BE PRESENT. FAILURE TO
DO SO MAY CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
FOR UNITS WITH SERIALS 1409 AND NEWER
LOW AMBIENT FOR DBC/DBG 180 & 240