Summary of Contents for Argos Monk’s Bench Style Linen Bin 832/5299
Page 2
Assembly Instructions Monk’s Bench Style Linen Bin Step 12 Assembly Instructions 832/5299 Screw the right side - please keep for future reference panel 6 the ends of the rails using 5 x 40mm screw as shown. Ensure that the right- hand hinge of the lid is properly located in its hole in the right side...
Page 3
Safety and Care Advice Components - Panels Important – Please read these instructions fully before starting assembly Please check you have all the panels listed below • Check you have all the • Do not stand or put weight on •...
Page 4
Components - Fittings Assembly Instructions If you have damaged or missing components, call the Customer Helpline: 0845 640 0800 Step 3 Please check you have all the fittings listed below Insert 2 x connector Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings into the holes in the may be supplied than are required.
Page 5
Assembly Instructions Assembly Instructions Step 6 Step 9 Screw both the hinges Screw the top front rail to the lid 10 using 4 1 and the bottom front rail 3 to the left x 12mm screw side panel 5 using 2 x Important: the hinge 40mm screw must fit flush to the edge...
Need help?
Do you have a question about the Monk’s Bench Style Linen Bin 832/5299 and is the answer not in the manual?
Questions and answers