Temperature And Door Alarm; Temperature Alarm - Miele FN 28262 ws Operating And Installation Instructions

Hide thumbs Also See for FN 28262 ws:
Table of Contents

Advertisement

The appliance has been fitted with a
warning system which ensures that the
temperature in the freezer cannot rise
unnoticed and to avoid energy being
wasted if the door is left open.

Temperature alarm

If the temperature in the freezer
becomes too warm, the temperature
display and the alarm symbol  will
flash. An alarm tone will also sound.
The temperature the appliance is set at
determines the temperature the
appliance recognises as being too
warm.
The acoustic and visual signals are
triggered, for example:
– if the appliance is switched on and
the temperature in the appliance
differs greatly from the set
temperature
– if a lot of room air enters the freezer
as food is being loaded, rearranged
or taken out
– when freezing large amounts of food
at once
– when you freeze fresh food that is still
warm
– in the event of a power cut
– if the appliance has a fault.
The alarm will stop and the alarm
symbol  will go out as soon as the
reason for the alarm has been resolved.
The temperature display will also stop
flashing.

Temperature and door alarm

Health risk due to consumption
of spoiled food.
If the temperature in the freezer
remains above -18 °C for a long
time, the frozen goods can start to
defrost. This shortens the shelf life of
the food.
Check whether the frozen food has
started to defrost. If it has, check
that the food is safe to use and if it
is, use it as soon as possible or cook
it before freezing it again.
Switching the temperature alarm off
early
You can switch the alarm off early if you
wish.
 Touch the sensor for switching off the
temperature alarm.
The alarm will stop.
The alarm symbol  will continue to
flash until the reason for the alarm has
been resolved.
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fn 28262 edt/cs

Table of Contents