Miele FN 28262 ws Operating And Installation Instructions page 43

Message
The power failure
symbol 
appears in the display.
The temperature display
will show the warmest
temperature recorded in
the freezer during the
interruption to the
power supply or power
cut.
"F0 to F9" appears in
the display.
Possible cause and remedy
The temperature in the appliance in the previous days
or hours has risen too high because of a power cut or
interruption to the power supply.
The appliance will continue to operate at the last
temperature setting when the power is restored.
 Touch the sensor to switch off the temperature
alarm.
The warmest temperature display will disappear. The
display will revert to showing the current temperature
in the freezer.
 Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. Defrosted food
may only be refrozen after it has been cooked.
There is a fault.
 Call Miele.
Problem solving guide
43