Optimal Operation; Cleaning And Maintenance - Electrolux EXN09C58HW User Manual

18 www.electrolux.com

12. OPTIMAL OPERATION

To achieve optimal performance, please
note the following:
• Adjust the air flow direction correctly.
• Adjust the temperature to achieve the
highest comfort level. Do not adjust the
unit to excessive temperature levels.
• Close doors and windows on COOL or
HEAT modes, or performance may be
reduced.
• Use TIME ON button on the remote
controller to select a time you want to
start your air conditioner.

13. CLEANING AND MAINTENANCE

13.1 Before Mainatenance
Turn the system off before cleaning.
To clean, wipe with a soft, dry cloth.
Do not use bleach or abrasives.
WARNING!
Power supply must be disconnectd
before cleaning the indoor unit.
• A cloth dampened with cold
• Do not use a chemically treated
• Do not use benzine, thinner,
• Never use water hotter than
13.2 Cleaning the Unit
Wipe the unit with a soft dry cloth only. If
the unit is very dirty, wipe it with a cloth
soaked in warm water.
water may be used on the indoor
unit if it is very dirty. Then wipe it
with a dry cloth.
cloth or duster to clean the unit.
polishing powder, or similar
solvents for cleaning. These may
cause the plastic surface to crack
or deform.
40ºC/104ºF to clean the front
panel, it could cause deformation
and discoloration.
• Do not put any object near air inlet or
air outlet, as the efficiency of the air
conditioner may be reduced and the air
conditioner may stop running.
• Clean the air filter periodically,
otherwise cooling or heating
performance may be reduced.
• Do not operate unit with horizontal
louver in closed position.
13.3 Cleaning the Filters
A clogged air filter reduces the cooling
efficiency of this unit. Please clean the
filter once every 2 weeks.
1. Lift the indoor unit front panel up to an
angle until it stops with a full support
from the bracket.
Dust filter handle
2. Hold the dust flter handle and lift it
up slightly to take it out from the filter
holder.