National Instruments PS-15 Installation Manual

INSTALLATION GUIDE
NI PS-15/16/17 Side Mount
Brackets

Bracket and Assembly Dimensions

This document provides the installation procedure for the
NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount
NI PS-15/16/17 power supplies sideways to reduce the installation depth.
Two side mounting options are possible:
• 35mm DIN-Rail Mount
• Panel Mount
This section provides bracket and assembly dimensions. Table 1 provides
a summary of the dimensions and weight of the overall assembly when a
specific bracket set is mounted to a specific power supply. The Unit column
lists the available power supplies. The Bracket Set column indicates the
appropriate brackets to use with the specified power supply. The A column
provides dimensions from the front of the power supply to the rearmost
mounting screw for the assembly of power supply and brackets. The
B column provides the total installation depth of the assembly when
mounted. The C column provides the depth of the power supply only.
The Length column provides the total length of the assembly. The Width
column provides the width of the mounting brackets. The Height column
provides the height of the brackets only. The Bracket Set Weight column
provides the weight of the bracket set only.