Razor Bat Wing Manual page 7

1 The Razor BAT Wing
1.2 Overview
When changing the fittings make sure that they are not cross threaded
when screwing them in. The best way to do this is to turn anti clock-
wise until the threads drop into position and then tighten gently. No
force should be used to get the threads started.
When the Inflator hose is unscrewed remember
to also take out the sealing O ring and replace
it in the other fitting with the rounded side
of the O ring facing down so that the flat
side of the inflator elbow will seal against
the flat side of the O ring.
The inflator elbow is keyed and it is im-
portant that it drops into position so that
it will seal on the O ring when the fitting is
screwed back into place.
7