Razor Bat Wing Manual page 15

2 Rigging the Razor BAT Wing
Step 3: Attaching and Adjusting the BAT Wing Rear Bungee
to the Razor Harness
The Wing Tab can also be removed from the bungee cord if required by pass-
ing the hitch of the Lark's Head Hitch back over the body of the Wing Tab
which will just leave the bungee cord attached to the MBP.
The bottom of the BAT Wing with the Wing Tab
attached should line up with the slot of the Wing
Tri-glide of the Razor Harness that holds the Butt
B ring in position. The Wing Tri-glide can be
moved up or down the crotch strap webbing of
the Razor Harness to achieve the desired location.
This ensures that the Butt B ring will not be cov-
ered by the BAT Wing and will remain accessible
at all times even with the wing fully inflated.
15