Step 2: Attaching And Adjusting The Bat Wing Waist Bungee - Razor Bat Wing Manual

2 Rigging the Razor BAT Wing

Step 2: Attaching and Adjusting the BAT Wing Waist Bungee

The BAT Wing Waist Bungee is designed to secure
the sides of the BAT Wing in a low profile stream-
lined position even when the wing is inflated and
still give easy unrestricted access to all of the Razor
Harness attachment points.
The waist bungee on the right hand side of
the BAT wing should have a long loop with
a small snap bolt attached to it. This will
feed across the waist and through the loop
of the crotch strap of the Razor
Harness and clip into the
short bungee loop attached
to the left hand side of
the BAT wing.
12
STYLES
A simple overhand knot
1
tied into the end of the
bungee cord will hold the
right hand side bungee in
place. This knot should be
on the inside of the wing.
O n the left hand side of
B
the wing a short waist bun-
gee cord is held in place
with 2 overhand knots tied
either side or the wing
grommet to secure it.
B
A