Step 3: Attaching And Adjusting The Bat Wing Rear Bungee; To The Razor Harness - Razor Bat Wing Manual

2 Rigging the Razor BAT Wing

Step 3: Attaching and Adjusting the BAT Wing Rear Bungee

to the Razor Harness

The BAT Wing Rear Bungee is designed to secure the bottom of the
BAT Wing in a low profile streamlined position even when the wing
is inflated and still give easy unrestricted access to all of the Razor
Harness attachment points as well as the coin dump valve of the
Backup wing.
The Rear Bungee is secured to the BAT Wing with the Wing
Tab and the BAT Wing can be quickly and easily removed
from the Razor Harness by undoing the button head
screw leaving just the Wing Tab and bungee cord still
attached to the MBP.
The bungee cord is attached to the Wing
Tab with a Lark's Head Hitch (aka Lanyard
Hitch). The bight of the Larks Head should
be on the outside of the wing tab.
14