Thermostat Quick Reference - White Rodgers 1F95-1277 Installation And Operating Instructions Manual

THERMOSTAT QUICK REFERENCE

Home Screen Description
Time of Day
Programming and Configuration Items
Displays and "Keypad Lockout" when in keypad
1
lockout mode.
Displays and "Temperature Limit" and "Keypad
Lockout" when limited range is activated and locked.
Displays only "Temperature Limit" when limited range
is activated.
Indicates period of day being programmed.
2
RUN SCHEDULE (run program) button.
3
SET TIME button or HOLD temperature button.
4
Displays "Change Filter" when the system has run
5
for the programmed filter time period as a reminder
to change or clean your filter.
COPY button or INSTALLER CONFIG button.
6
CLEAN DISPLAY button allows 30 seconds to wipe off
7
the display or ADVANCE DAY button for programming.
8 Used in programming to set time and in configuration
menu to change selections.
"Hold Until" indicates the time when a temporary hold
9
period will end.
"Hours" and "Days" displays during steps in installer
10
configuration.
The words "Hold At" are displayed when the thermo-
11
stat is in the HOLD mode. "Temporary Hold At" is
displayed when the thermostat is in a temporary HOLD
mode.
"Call For Service" indicates a fault in the heating/
12
cooling system. It does not indicate a fault in the
thermostat.
Figure 2 – Home Screen Display
Day of Week
System
Switch
Fan
Switch
Indicates when
thermostat is calling
for Heat or Cool
Room
Temperature
Battery Level Indicator
Indicating the current power level
of the 2 "AA" batteries.
Full power remaining.
Half power remaining.
Change
The batteries should be replaced at this time.
Figure 3 – Programming & Configuration Items
16
10
9
8
13
14
7 6
"System On" indicates when heating or cooling stage
13
is energized. "+2" also indicates when a second stage
is energized.
"Copy" indicates the copy program feature is being
14
used during programming.
A steady "Cool Savings" display indicates the feature
15
is enabled in the installer menu. A flashing "Cool
Savings" display indicates the feature is active.
16 "Remote" indicates that the indoor remote temperature
sensor, is being accessed. "Outdoor Remote" indi-
cates the outdoor remote temperature sensor is being
accessed.
Set Temperature
Temperature
UP/Down used for
modifying set point
as well as to
navigating the menus
Enters comfort
temperature settings
into the schedule
Menu key for entering
different modes such as
Cleaning, Configuration, Set
Time and Set Schedule
11
15
12
5 4
1
2
3
3