Thermostat Quick Reference - White Rodgers 1F95-0680 Installation And Operating Instructions Manual

THERMOSTAT QUICK REFERENCE

Home Screen Description
Displays the power level of
the 2 "AA" batteries:
indicates good power level
indicates batteries at about
half power. "Change
batteries are low and should be
replaced with 2 new premium brand
"AA" Alkaline batteries.
(See page 2 for more details)
Programming and Confi guration Items
"System On" indicates when heating or cooling stage
1
is energized. "System On +2" indicates when a second
stage is energized.
2
The word HOLD is displayed when the thermostat is
in the HOLD mode. Temp is displayed when
the thermostat is in a Temporary HOLD mode.
Displays Change Filter when the system has run for
3
the programmed fi lter time period as a reminder to
change or clean your fi lter.
4
Displays "Set" for setpoint when in Run Program mode.
Displays System Mode (Heat, Em, Auto, Cool, Off)
5
or Time in menu mode.
Displays Fan Mode (On, Auto) Prog FAN On or "Run
6
Sched" in Menu mode.
4
Figure 5 – Home Screen Display
" indicates
Figure 6 – Programming & Confi guration Items
12
3
1
9
5
13
Room
Temperature
System
Fan
Indicator
Indicator
8
2
4
7
6
7
Displays "Run Schedule", "Schedule", or "Menu".
8
Displays "Save" when Cool Savings
Displays "Heat Pump" when system is confi gured
9
as Heat Pump thermostat.
Displays "Hold" in programmable mode when not in
10
"Hold" mode. Displays Light Bulb in non-program-
mable mode.
Initially displays "Auto Sched". If Auto Schedule had
11
been used or disabled, then it displays "Cool Savings"
when in the Cool Mode. Displays "Copy" in Schedule
mode and "Fan" in Fan Schedule mode.
"Call For Service" indicates a diagnostic fault in the
12
heating/cooling system, it does not indicate a fault in the
thermostat.
"Keypad Lockout" in Menu mode when selecting key-
13
pad Lockout or in RUN when a keypad Lockout is active.
Setting
Temperature
10
11
TM
is working.