Resetting The Cda3-35; Table 3: Gui Overview - Hitron CDA3-35 User Manual

1
Open a browser window.
2
Enter the CDA3-35's IP address (default 192.168.100.1) in the URL bar.
3
The System Information screen displays (see
on page 27).
4
Select the Language, if required. By default, the CDA3-35's interface displays in
English.
Figure 5: GUI Overview
Table 3: GUI Overview
Navigation Bar Use this section to move from one related screen to another.
Main Window Use this section to read information about your CDA3-35's
configuration, and make configuration changes.
1.6

Resetting the CDA3-35

When you reset the CDA3-35 to its factory defaults, all user-configured settings are
lost, and the CDA3-35 is returned to its initial configuration state.
18 18 Version 1.0, 05/2015. Copyright
Version 1.0, 05/2015. Copyright
CDA3-35 User's Guide
The System Information Screen
2012 Hitron Technologies
2015 Hitron Technologies
INTRODUCTION