Subscribe to Our Youtube Channel
Related Manuals for Clarke CAM400
Summary of Contents for Clarke CAM400
- Page 1 16” VENTILATION FAN MODEL NO: CAM400 (230V) PART NO: 3230240 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0120 - ISS 1...
-
Page 2: Safety Rules
INTRODUCTION Thank you for purchasing this CLARKE Ventilation Fan which is designed for indoor use in an industrial environment. Read this manual carefully, in doing so you guarantee the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Electrical Safety
Check that the fan is in good working order. Take immediate action to have it repaired or any damaged parts replaced. DO NOT attempt to repair the fan yourself. Always contact the Clarke service department who will use recommended parts only. Unapproved parts may be dangerous and will invalidate your warranty. -
Page 4: Electrical Connections
BEFORE USE Before commencing assembly, check for damage and or shortages etc, any damage or shortage should be reported to your Clarke dealer where the fan was purchased. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 5: Care And Maintenance
WARNING: ALWAYS DISCONNECT FROM THE POWER SUPPLY BEFORE PERFORMING ANY CLEANING OR MAINTENANCE TASKS. REPAIRS SHOULD BE CARRIED OUT BY THE CLARKE SERVICE DEPARTMENT. Clean the with a soft damp cloth, Do not use solvents or abrasives. If used in spaces with high dust content, clean the guards and fan blades by vacuuming or wiping. -
Page 6: Specifications
No other maintenance is required, should you discover any problem with the ventilation fan return it to the CLARKE service department for repair. Should the fan fail to operate, check the power supply and that the fuse in the plug has not blown. Abnormal noise while the fan is running may occur if the fan is not standing on a level surface. -
Page 7: Declaration Of Conformity
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CAM400 and is the answer not in the manual?
Questions and answers