Subscribe to Our Youtube Channel
Related Manuals for Clarke CAM36C
Summary of Contents for Clarke CAM36C
- Page 1 36” DRUM FAN MODEL NO: CAM36C PART NO: 3230448 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS DL1122...
-
Page 2: Environmental Recycling Policy
INTRODUCTION Thank you for purchasing this CLARKE 36” Drum Fan. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Electrical Connections
ELECTRICAL CONNECTIONS WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz. -
Page 4: Safety Precautions
SAFETY PRECAUTIONS 1. ALWAYS read the manual before use. 2. ONLY suitable for indoor use. 3. DO NOT operate without the front and rear grills in place. 4. AVOID using in dusty environments. 5. DO NOT use in environments containing chemical fumes etc. 6. - Page 5 ASSEMBLY FAN CRADLE ASSEMBLY 1. Insert the axle through the axle brackets on the outside of the fan frame. 2. Align the holes in the brackets to the screw holes in the axle and secure using the washers and hex bolts and a cross headed screwdriver.
-
Page 6: Fan Operation
OPERATION FAN OPERATION Always operate the fan in an upright position, following all instructions and recommendations listed in this manual. FAN LOCATION Place the fan in the area of the room that will provide proper fan cooling. FAN CONNECTION Plug the fan directly into a 230v AC, 50Hz wall outlet. Be sure the plug fits tightly into the outlet. -
Page 7: Cleaning And Maintenance
CLEANING & MAINTENANCE Warning: NEVER OPERATE THE FAN WITH THE FRONT GUARD REMOVED. DO NOT USE THE FAN IF IT HAS MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY. CLEANING If the fan has been operating for long periods in a very dusty environment, the blades and motor assembly may eventually require cleaning. -
Page 8: Parts List And Diagram
PARTS LIST AND DIAGRAM ESCRIPTION ESCRIPTION Front Grille Switch Blade Capacitor Drum Power Cable Handle Wheel Rear Grille Axle Motor Axle Brackets Switch Box Foot Switch Knob Support Pads Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 9: Specifications
SPECIFICATIONS MODEL CAM36C Part No: 3230448 Operating Voltage: 230 V AC (50Hz) Rated Input Wattage: 450 W Fan Speed - Low: 960 rpm Fan Speed - High: 1090 rpm Dimensions (W x D x H): 980 x 470 x 1000 mm... - Page 10 DECLARATION OF CONFORMITY - UKCA Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
-
Page 11: Declaration Of Conformity (Ce)
DECLARATION OF CONFORMITY - CE Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... - Page 12 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CAM36C and is the answer not in the manual?
Questions and answers