Related Manuals for Clarke CAM24C
Summary of Contents for Clarke CAM24C
- Page 1 24” DRUM FAN MODEL NO: CAM24C PART NO: 3230446 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS DL1122...
-
Page 2: Environmental Recycling Policy
INTRODUCTION Thank you for purchasing this CLARKE 24” Drum Fan. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Electrical Connections
ELECTRICAL CONNECTIONS WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz. -
Page 4: Safety Precautions
SAFETY PRECAUTIONS 1. ALWAYS read the manual before use. 2. ONLY suitable for indoor use. 3. DO NOT operate without the front and rear grilles in place. 4. AVOID using in dusty environments. 5. DO NOT use in environments containing chemical fumes etc. 6. - Page 5 ASSEMBLY FAN CRADLE ASSEMBLY WARNING: THERE IS ONE SMALL HOLE ON EACH SIDE OF THE TWO CRADLE BASES. THE TWO SMALL HOLES SHOULD BE KEPT ON THE INNER SIDE AND AT TEH SAME DIRECTION. 1. Align the cradle base with the support brackets attached to the fan body sides.
- Page 6 FAN WHEEL ASSEMBLY 1. Insert axle clamps onto the two sides of the axle, followed by the wheels, as shown. 2. Insert the washer and nut onto the ends of the axle and tighten. 3. Align the axle clamps with the indents on the cradle base and push them on to attach as shown.
-
Page 7: Fan Operation
OPERATION FAN OPERATION Always operate the fan with the supports in an upright position following all instructions and recommendations listed in this manual. FAN LOCATION Place the fan in the area of the room that will provide proper fan cooling. ADJUST FAN TILT To adjust the tilt angle (360 round the... -
Page 8: Cleaning And Maintenance
CLEANING & MAINTENANCE WARNING: NEVER OPERATE THE FAN WITH THE FRONT OR REAR GUARD REMOVED. DO NOT USE THE FAN IF IT HAS MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY. CLEANING If the fan has been operating for long periods in a very dusty environment, the blades and motor assembly may eventually require cleaning. -
Page 9: Parts List And Diagram
PARTS LIST AND DIAGRAM ESCRIPTION ESCRIPTION Front Grille Capacitor Blade Power Cable Drum Support Bracket Handle Cradle Base Rear Grille Rubber Feet Motor Spacer Tube Switch Box Wheel Switch Knob Axle Switch Axle Clamp Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 10: Specifications
SPECIFICATIONS MODEL CAM24C Part No: 3230446 Operating Voltage: 230 V AC (50Hz) Rated Input Wattage: 230 W Fan Speeds (Low): 950 rpm Fan Speeds (Medium: 1100 rpm Fan Speeds (High): 1200 rpm Dimensions (W x D x H): 735 x 285 x 760 mm... -
Page 11: Declaration Of Conformity
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... - Page 12 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CAM24C and is the answer not in the manual?
Questions and answers