ETC ColorSource Spot jr Installation Manual page 6

ETC Installation Guide
ColorSource Spot jr
Adjust the Zoom and Focus the Fixture
Use the Zoom knob to adjust the 25°–50° zoom, and use the Focus knob to
adjust the field. Because the Zoom knob and Focus knob are easiest to adjust
when on the bottom of the fixture, avoid mounting the ColorSourceSpot jr in
an orientation where the knobs are on top.
Accessory holder
(optional)
attaches to front
Accessories
You can use standard accessories, such as a gobo, in the accessory slot (see
image above). You can also attach an accessory holder to the front of the
fixture (order part number 7416K1001). After you attach the accessory holder,
you can use it to secure accessories such as a top hat or half hat. See the
ColorSource Spot jr datasheet at
You can attach a ColorSource Relay to the yoke. See
information about ColorSource Relay.
ColorSource Spot jr
Zoom Focus
knob knob
etcconnect.com
Page 6 of 12
Accessory
slot
Shutters
(x4)
for accessory information.
etcconnect.com for more
ETC