Table of Contents
Advertisement
ETC Installation Guide
ColorSource Spot jr
Overview
The ColorSourceSpot jr provides built-in zoom capability and uses the RGB-L
(red, green, blue, and lime) color system to provide a rich, bright light.
The ColorSource Spot jr is available in both original and Deep Blue variants.
The Deep Blue uses an array that offers richer, more saturated blues and
stronger magentas in exchange for the more jewel-toned blues like sky or
turquoise. For more information, see the ETC website at etcconnect.com.
Note:
of software. For information on updating fixture software, see
the Fixture Software on
Features described in this document require the latest version
page 10.
Corpora te He a dqua rte rs Middleton, WI, USA +1 608 831 4116
London, UK +44 (0)20 8896 1000 Holzk irc he n, DE +49 (80 24) 47 00-0
Rome , IT +39 (06) 32 111 683 Hong Kong +852 2799 1220 P a ris, FR +33 1 4243 3535
We b
etcconnect.com
Conta c t
etcconnect.com/contactETC
Product information and specifications subject to change. ETC intends this document
to be provided in its entirety. Trademark and patent
7 4 1 6 M 2 1 0 0 -2 .0 Rev B Released 2020-06
Support
support.etcconnect.com
© 2020 Electronic Theatre Controls, Inc.
Update
info: etcconnect.com/ip
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ETC ColorSource Spot jr
Summary of Contents for ETC ColorSource Spot jr
- Page 1 The ColorSourceSpot jr provides built-in zoom capability and uses the RGB-L (red, green, blue, and lime) color system to provide a rich, bright light. The ColorSource Spot jr is available in both original and Deep Blue variants. The Deep Blue uses an array that offers richer, more saturated blues and stronger magentas in exchange for the more jewel-toned blues like sky or turquoise.
-
Page 2: Important Safeguards
Do not use this equipment for other than intended use. • SAVE THESE INSTRUCTIONS Note: The light source in this luminaire is not user-replaceable, and must be replaced only by a qualified technician. Contact ETC Customer Support for assistance. ColorSource Spot jr Page 2 of 12... -
Page 3: Typical Power Consumption
ETC Installation Guide ColorSource Spot jr Environment The ColorSource Spot jr operates in ambient temperatures of 0°C–40°C and comes with a variable-speed fan. The ColorSourceSpot jr is for indoor use only. Maximum recommended ambient operating temperature: Ta = 40°C • (104°F) Maximum anticipated external surface temperature at 40°C ambient: •... -
Page 4: Installation
ColorSource Spot jr Installation Mounting The ColorSource Spot jr ships with a standard yoke for mounting with a clamp. You can adjust the position of the yoke when necessary for low- clearance mounting. Mount the ColorSourceSpot jr in an orientation where the knobs are on the bottom. - Page 5 ETC Installation Guide ColorSource Spot jr Set Up the Fixture Plug the power cord into the powerCON In connector on the rear of the fixture. Make any power-thru cable connections prior to applying a power source. Make any DMX connections, and if the fixture is the last in a DMX line, terminate the fixture.
- Page 6 You can also attach an accessory holder to the front of the fixture (order part number 7416K1001). After you attach the accessory holder, you can use it to secure accessories such as a top hat or half hat. See the ColorSource Spot jr datasheet at etcconnect.com for accessory information.
-
Page 7: Set The Dmx Address
ETC Installation Guide ColorSource Spot jr Set the DMX Address Press any button to wake the display. The display shows the DMX address. Use the Up and Down buttons to select the DMX address for the fixture. You can also use RDM for DMX addressing. See RDM Values on page 11... -
Page 8: Dmx Control Channels
Strobe** Lime Strobe** *Original ColorSource Spot jr fixture uses blue in channel 4; Deep Blue fixture uses indigo in channel 4. **Use DMX values of 0 or 255 for no strobe. Use values of 1–254 to increase the strobe rate from 1 per second up to 33 per second. - Page 9 ETC Installation Guide ColorSource Spot jr Pre-configured Presets Preset Name Preset Name 3200 K White Magenta 5600 K White Yellow Orange Green Light Yellow Blue Light Blue Cyan Light Pink Pre-configured Sequences Sequence Name Rainbow Fast Rainbow Slow Warm Colors Fast Cool Colors Fast...
- Page 10 For more information on UpdaterAtor, see the UpdaterAtor Software Quick Guide , which you can download for free from etcconnect.com. When you add a ColorSource Spot jr fixture running a newer software version or update a ColorSource Spot jr fixture to a newer software version using UpdaterAtor, you can use that fixture to push the newer software version to all connected ColorSource Spot jr fixtures.
-
Page 11: Restore Factory Defaults
: Screen toggles between to indicate a problem with • the color calibration. The fixture will need to be returned to the ETC factory; contact your local dealer to set up a repair. : Screen toggles between to indicate that the fixture •... -
Page 12: Quick Reference
Strobe** Lime Strobe** *Original ColorSource Spot jr fixture uses blue in channel 4; Deep Blue fixture uses indigo in channel 4. **Use DMX values of 0 or 255 for no strobe. Use values of 1–254 to increase the strobe rate from 1 per second up to 33 per second.
Need help?
Do you have a question about the ColorSource Spot jr and is the answer not in the manual?
Questions and answers