Setting Temporary Holds - White Rodgers SuperStat Pro SuperStat Pro Programmable Thermostat User Manual

Setting Temporary Holds

Quick Guide
Press to change
the setpoint to the
desired
temperature.
SuperStat Pro User Guide
Description
Be sure your screen shows the normal display. Press the up or down
arrow button to change the temperature setpoint higher or lower.
The HOLD icon below the Day of the Week bar will begin to flash,
indicating that you have placed a temporary hold on the system.
The system will return to its normal, pre-programmed schedule at
the beginning of the next period of the day interval or Critical price
period.
If you want to return to your normal programmed setting before the
temporary hold has defaulted back to your program, you can clear
the temporary hold by pressing the RUN button.
Thermostat Display
HOLD will flash:
23